FEM Analysis of Engine Fins using Variations in Material and Design
Keywords:
ANSYS Software, FEM, Engine Fins, Thermal characteristicsAbstract
The major goal of this research is to look at previous studies that looked at changing the shape and material of the cylinder fin in order to improve the cooling fine heat transfer rate. Temperature changes of fins created across four geometries (plate fins, circular pins, holes, and pipe fins) were assessed and authorized using ANSYS software, as well as a clear state heat exchange research. The trials were carried out to examine whether the fins had any temperature changes. Fine performance models are assessed in Ansys using experimentally produced heat flow and temperature changes, and FEM is utilized to identify temperature variations in various fine models in the field. The goal of this research is to enhance the rate of heat dissipation by using wind movement. The research's major goal is to increase thermal characteristics by modifying shape, material, and fine design.
References
Dhamyaa S. Khudhur, Reyadh ChAl-Zuhairy, Muna S. Kassim, "Thermal analysis of heat transfer with different fin geometry through straight plate-fin heat sinks", International Journal of Thermal Sciences, Volume 174, April 2022.
Abhay Bele, Akash Chaurasia, Aniket Gavas, "Thermal Analysis of IC Engine Bore Fins", International Journal of Innovative Research in Science, Engineering and Technology (IJIRSET), Volume 11, Issue 4, April 2022.
Shankar Durgam, Aniket Kale, Nikhil Kene, "Thermal analysis of fin materials for engine cylinder heat transfer enhancement", IOP Conf. Series: Materials Science and Engineering, 2021.
Charan, Srivastav, Bharadwaj, "Thermal Analysis on Rectangular Plate Fin with Perforations Using Ansys", International Journal of Creative Research Thoughts, 2018.
Sangaj, Shinde, Shanediwan, Potdar, Suryawanshi, "Thermal and Parametric Analysis of Pin-Fin", International Research Journal of Engineering and Technology (IRJET), Volume 05, Issue 02, Feb-2018.
Kiran Beldar,Avinash Patil,"Design and Analysis of cylinder having longitudinal fins with rectangular notches", International Journal of Scientific Development and Research (IJSDR), 2017.
Rajesh, Rahamathullah, Malleswara Rao, "design and optimization of engine cylinder fins by varying Geometry and material with thermal analysis", International Journal of Core Engineering & Management, 2017.
Mayank jain, Mahendra Sankhala, Kanhaiya Patidar,"heat transfer analysis and optimization of fins by Variation in geometry", International Journal of Mechanical and Production Engineering, Volume- 5, Issue-7, Jul.-2017.
Kummitha, Reddy, "Thermal Analysis of cylinder block with fins for different materials using ANSYS", ICAAMM, Elsevier, 2016.
S.Ravikumar, Chandra, Harish, "Experimental and Transient Thermal Analysis of Heat Sink Fin for CPU processor for better performance", Materials Science and Engineering, 197, 2017.
Sandeep Kumar, Nitin Dubey, "Investigation and Thermal Analysis of Heat Dissipation Rate of Single Cylinder SI Engine", IJEDR, Volume 5, Issue 2, 2017.
Mogaji, Owoseni, "Numerical Analysis of Radiation Effect on Heat Flow through Fin of Rectangular Profile", American Journal of Engineering Research (AJER), Volume-6, Issue-10, pp-36-46, 2017.
Arefin, "Thermal Analysis of Modified Pin Fin Heat Sink for Natural Convection", 5th International Conference on Informatics, Electronics and Vision, 2016.
Balendra Singh, Satish Singh, "A Research Paper on Heat Transfer in Notch Fin and UN NotchFin", International Journal for Research in Applied Science & Engineering Technology (IJRASET), Volume 4 Issue IX, September 2016.
Kongre, Barde, "A Review Paper on Thermal Analysis and Heat Transfer of Single Cylinder S. I. Engine Fins", International Journal of Engineering Research & Technology (IJERT), Volume 4, Issue 30, 2016.
Downloads
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
