Comparative study on the design of RCC and steel G+ 15 story Residential Building

Authors

  • Dheeraj Bhawar,Monika Pagare

Keywords:

Zone factor, wind loads, design loads, high rise buildings

Abstract

This study presents a comparative study of wind loads to decide the design loads of a G+15 building. The significance of this examination is to estimate the design loads for a structure which is subjected to wind loads in a particular region. It is well known fact that the wind loads may be estimated in particular zone with a specified zone factor. Then the wind load of that zone can also be estimated based on the basic wind speed and other factors of that particular region. However, the wind velocity is stochastic and time dependent. In the present study a multi-storied building is analyzed for wind loads using IS 875 code. In this Analysis, G+15 storied building is considered and applied various loads like wind load, static load and results are studied and compared between with wind load or without wind load.

References

Fragiacomo, M., Dujic, B., & Sustersic, I. (2011). Elastic and ductile design of multi-storey crosslam massive wooden buildings under seismic actions. Engineering structures, 33(11), 3043-3053.

Grabska, E., Łachwa, A., & Ślusarczyk, G. (2012). New visual languages supporting design of multi-storey buildings. Advanced Engineering Informatics, 26(4), 681-690.

Desai, N., & McGinley, W. M. (2013). A study of the out-of-plane performance of brick veneer wall systems in medium rise buildings under seismic loads. Engineering Structures, 48, 683-694.

Acred, A., & Hunt, G. R. (2014). Stack ventilation in multi-storey atrium buildings: A dimensionless design approach. Building and environment, 72, 44-52.

Fröderberg, M., & Thelandersson, S. (2015). Uncertainty caused variability in preliminary structural design of buildings. Structural Safety, 52, 183-193.

Papavasileiou, G. S., & Charmpis, D. C. (2016). Seismic design optimization of multi–storey steel–concrete composite buildings. Computers & Structures, 170, 49-61.

Lu, Y., Hajirasouliha, I., & Marshall, A. M. (2016). Performance-based seismic design of flexible-base multi-storey buildings considering soil–structure interaction. Engineering Structures, 108, 90-103.

Hasançebi, O. (2017). Cost efficiency analyses of steel frameworks for economical design of multi-storey buildings. Journal of constructional steel research, 128, 380-396.

Omrani, S., Garcia-Hansen, V., Capra, B., & Drogemuller, R. (2017). Natural ventilation in multi-storey buildings: Design process and review of evaluation tools. Building and environment, 116, 182-194.

Gomez, S. S., Geurts, C. P. W., & Metrikine, A. (2018). On the importance of soil damping for tall buildings loaded by wind. Engineering Structures, 163, 426-435.

Wagh, S. A., & Waghe, U. P. (2014). Comparative study of RCC and steel concrete composite structures. International Journal of Engineering Research and Applications, 4(4), 369-376.

Divya, R., & Murali, K. (2021). Comparative study on design of steel structures and RCC frame structures based on column span. Materials Today: Proceedings, 46, 8848-8853.

Panchal, D. R., & Marathe, P. M. (2011). Comparative Study of RCC, steel and composite (G+ 30 storey) building. Nirma University, Ahmedabad, India.

Mohite, M. N. A., Joshi, M. P., & Deulkar, D. W. (2015). Comparative Analysis of RCC and Steel-Concrete-Composite (B+ G+ 11 Storey) Building. International Journal of Scientific and Research Publications, 5(10), 2250-3153.

Jagadale, S., Shiyekar, M. R., Ghugal, Y. M., & Tech, M. (2019). Comparative Study of Steel, RCC and Composite Frame Building. International Research Journal of Engineering and Technology (IRJET), e-ISSN, 2395-0056.

Sharma, A. S., Iyappan, G. R., & Harish, J. (2015). Comparative study of cost and time evaluation in RCC, steel & Composite high rise building. Journal of Chemical and Pharmaceutical Sciences, 8(4).

Suthar, K. P., & Butala, A. M. (2020). Comparative Study on Seismic Analysis of (G+ 10) RCC, Steel and Steel-Concrete Composite Building. International Research Journal of Engineering and Technology (IRJET), 7(05).

Bhanu Prakash, P. M., YM, D. V. K., & Rao, T. S. (2021). Review On Comparative Study On RCC And Steel Structure For Different Criteria’s. International Journal of Multidisciplinary Educational Research, 10(4), 1-4.

Jyothi, D. N. (2017). COMPARATIVE ANALYSIS OF RCC, STEEL AND STEEL TUBE STRUCTURES OF A G+ 2 COMMERCIAL BUILDING. ATMECE.

Savadi, A. S., & Hosur, V. (2019). Comparative study of RCC, steel and composite structures for industrial building. International Journal of Advance Research and Innovative Ideas in Education, 5(4), 637-647.

Charantimath, S. S., Cholekar, S. B., & Birje Manjunath, M. (2014). Comparative study on structural parameter of RCC and composite building. Civil and Environmental Research, ISSN, 2224-5790.

Khan, M. A. (2017). Comparative Study of RCC & Structural Steel-Concrete Composite Frame for Linear and Non-Linear Analysis. International Research Journal of Engineering and Technology (IRJET), 4(07).

Singhal, S., & Siddiqui, B. (2019). Comparative Study between RCC Structures and Prefabricated Structures. Int. Res. J. Eng. Technol, 6, 2890-2894.

Krishna, B. V., Kumar, P. S., Chandana, K., Bhoomesh, S., & Gopal, P. V. (2023). Comparative Analysis & Design of RCC & Steel Preheater Tower Structure by Using STAAD. Pro. In IOP Conference Series: Earth and Environmental Science (Vol. 1130, No. 1, p. 012025). IOP Publishing.

Reddy, G. S. R., Bolla, M., Patton, M. L., & Adak, D. (2021, February). Comparative study on structural behaviour of circular and square section-Concrete Filled Steel Tube (CFST) and Reinforced Cement Concrete (RCC) stub column. In Structures (Vol. 29, pp. 2067-2081). Elsevier.

Vaseem, M. D., & Patagundi, B. R. (2016). Comparison between RCC and Steel Structures by Seismic Analysis. Bonfring International Journal of Man Machine Interface, 4, 134-40.

Patil, V., & Kewate, S. (2015). Comparative Study on Dynamic Analysis of Composite, RCC & Steel Structure. International Journal of Engineering Technology, Management and Applied Sciences, 3(8), 135.

Tedia, A., & Maru, D. S. (2014). Cost, analysis and design of steel-concrete composite structure Rcc structure. IOSR Journal of Mechanical and Civil Engineering, 11(1), 54-59.

Sharma, A. S., Priya, R. A., Thirugnanam, R., & Priya, P. R. (2016). Comparative study on multi-storey structure Of RCC and composite material. Indian Journal of Science and Technology, 9(2), 1-5.

Hiremath, P., & Tantray, A. H. (2023). Comparison of Conventional RCC Columns, Steel Columns and Composite Columns. J. Struct. Eng. Manag, 10, 35-44.

Downloads

How to Cite

Dheeraj Bhawar,Monika Pagare. (2025). Comparative study on the design of RCC and steel G+ 15 story Residential Building. International Journal of Research & Technology, 13(4), 576–587. Retrieved from https://ijrt.org/j/article/view/641

Similar Articles

<< < 19 20 21 22 23 24 25 26 27 28 > >> 

You may also start an advanced similarity search for this article.