Simulation modal for SPMC as Single Phase Cycloconverter with SPWM
Keywords:
Driver circuit, Electric Drive System, Indirect Converter, Direct Converter, IGBT, SPMC, SPWMAbstract
Modern power electronics revolutionized the idea of Matrix converter, which is the universal in its nature and provide all Silicon solution to the developer. Electric drive system (EDS) provides flawless control to the electrical machine and it is important to have a converter that can fulfill the demand of the particular industry. The ac-ac controller is of the two types 1) Indirect converter 2) Direct converter. Matrix converter is often used for the three phase applications but the popularity of the matrix converter is much more in single phase system because of its universal nature. Single phase Matrix converter (SPMC) is consists of the four bi-directional switches (IGBT-diode pairs) and all the switches are capable of the reverse blocking and bidirectional current flow. Controlling of bidirectional switches is made in the driver circuit. Sinusoidal Pulse width Modulation Technique is used for the controlling of switches. All the work is done with the help of Matlab/Simulink software.
References
Z.Idris, Mustafa Kamal Hamzah, Nagah Ramzi Hamzah, “Modeling and simulation of a new single phase to single phase cycloconverter based on spmc topology with sinusoidal pulse width modulation using Matlab/Simulink”, pp.1557-1562 IEEE PEDS 2005.
Lee Empinngham , P.W.Wheeler, Johan W.Kolar, Jose Rodríguez, John C.Clare,“Technological Issues and Industrial application of Matrix Converter,” IEEE Transactions on Industrial Electronics, Vol. 60, no. 10, October 2013.
Muhammad H.Rashid, “Power Electronics Handbook”, Academic Press, 2001, web address: http://www.academicpress.com
Andrzej M.Trzynadlowski, “Introduction to Modern Power Electronics”, 3rd edition, copyright by John wiley and sons, 2016.
Maamoun, A., “Development of cycloconverters,” Canadian Conference on Electrical and Computer Engineering, 2003. IEEE CCECE Vol.1,4,7– pp 521–524 May 2003.
Z.Wang and Y. Lin, “Modeling and Simulation of a Cycloconverter Drive System for Harmonic studies”, IEEE Transactions on Power Electronics, vol. 47, no. 3, , pp. 533-541, June 2000.
Zahruddin Idris, Mustafa Kamal hameah, “Implementation of a new Single phase Cycloconverter based on Single phase Matrix Converter Topology using Sinusoidal Pulse Width Modulation with passive Load Condition”, in 2006 first IEEE Conference on Industrial Electronics and Applications.
Mahendra Nagalingam, Dr. G.Guruswamy, “Computer Applications in Power Electronic Systems”, in International Journal of Computer Applications, Volume 10, No.7. November 2010.
Vytla Satish, Sarvan Kumar Kontalaha, A. Uday Ravi Kiran, “Design and Implementation of Single Phase Matrix Converter for Cycloconverter Operation”, in International Journal of Engineering Research & Technology (IJERT) Vol. 3 Issue 1, January – 2014 ISSN: 2278-0181.
K.Vijay Kumar, R.Sundar Raj, S. Kannan, “Realization of Matrix Converter as revolutionized Power Electronic Converter employing Sinusoidal Pulse Width Modulation”, IEEE International Conference on Computational Intelligence and Computing Research, 2013.
Ziogas P D, Khan S I, Rashid M.H, “Analysis and design of forced commutated cycloconverter structures with improved transfer characteristics”, IEEE Transaction on Industrial Electronics.1986,IE-33:271-280.
Downloads
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
